Instrumentation Engineering

A digital electronics trainer module built around a 4-bit universal shift register IC used to demonstrate serial and parallel data shifting operations in digital logic laboratories.

A microcontroller trainer kit built around the 8051 architecture used to teach embedded programming, interfacing, and I/O control in microprocessor laboratories.

A rotational speed transducer that generates an AC voltage proportional to shaft speed, used in instrumentation laboratories to teach speed measurement and sensor calibration.

A six-degree-of-freedom robotic arm with AI-assisted control used to teach robotics kinematics, motion planning, and automation concepts in instrumentation and robotics laboratories.

A bench instrument used to test the functionality of analog and digital integrated circuits by verifying logic states and output responses against expected truth tables.

A trainer kit used to demonstrate the acquisition and processing of physiological signals for teaching biomedical instrumentation principles.

A pressure-measurement trainer that couples a Bourdon tube sensing element with an LVDT to convert mechanical deflection into an electrical signal for teaching pressure transducer principles.

A laboratory setup using a capacitive probe to measure liquid level by sensing changes in capacitance, used to teach capacitive level-sensing techniques.

A process control trainer with primary and secondary control loops used to teach cascade control strategy and controller tuning in process instrumentation laboratories.

An experimental kit built around a Class A power amplifier circuit used to study biasing, gain, and distortion characteristics in analog electronics laboratories.

A demonstration circuit of a Class B push-pull amplifier configuration used to teach crossover distortion and power-amplifier efficiency concepts.

A power electronics trainer kit that demonstrates Class A through Class E thyristor commutation circuits used to teach SCR turn-off techniques.

A trainer module used to study open-loop and closed-loop control system responses, including stability and transient behavior, in control engineering laboratories.

A process instrumentation trainer built around an actual control valve used to teach valve characteristics, actuation, and flow control response.

A power electronics experiment setup that demonstrates the output waveform of a controlled rectifier under resistive and resistive-inductive loads.

A cutaway physical model exposing the internal construction of various valve types, used to teach valve design and working principles in instrumentation laboratories.

A pressure calibration instrument that applies calibrated weights to a piston-cylinder system to generate known reference pressures for calibrating pressure gauges and transmitters.

A power electronics trainer kit used to study the breakover and triggering characteristics of a DIAC in triggering circuits for thyristors and triacs.

An interactive touch-enabled display board used for digital classroom instruction and demonstration of laboratory concepts in engineering departments.

A bench instrument that captures, displays, and stores electrical waveforms used to measure voltage, frequency, and timing characteristics of signals in electronics laboratories.

A bench power supply providing two independently regulated 0-30V, 3A DC outputs used to power electronic circuits and trainer kits during laboratory experiments.

A bench power supply providing two independently regulated 0-30V, 5A DC outputs used to power higher-current electronic circuits and trainer kits in laboratory experiments.

A biomedical instrumentation trainer kit that demonstrates the acquisition, amplification, and filtering of electrocardiogram signals for teaching medical electronics.

An integrated bench setup combining power supplies, signal sources, and measuring instruments used as a general-purpose station for building and testing electronic circuits.

A laboratory rig used to demonstrate fluid flow-rate measurement techniques and calibrate flow sensors in process instrumentation courses.

A signal-generating bench instrument capable of producing sine, square, and triangular waveforms up to 10 MHz for testing and calibrating electronic circuits.

A process instrumentation trainer kit that demonstrates current-to-pressure and pressure-to-current signal conversion used in industrial control loops.

A power electronics trainer kit used to study the switching and characteristic behavior of an Insulated Gate Bipolar Transistor.

A trainer kit built around a strain-gauge load cell used to teach force and weight measurement principles in instrumentation laboratories.

A trainer kit built around a Linear Variable Differential Transformer used to teach displacement measurement principles in instrumentation laboratories.

A precision instrument that generates and measures multiple electrical and process parameters used to calibrate laboratory instruments such as multimeters and transmitters.

An analog electronics trainer used to study the effect of negative feedback on gain, bandwidth, and stability of amplifier circuits.

A control systems trainer kit used to study and compare the response of proportional, proportional-integral, proportional-derivative, and PID controller configurations.

A power electronics trainer kit that demonstrates the operation of a parallel inverter circuit used to convert DC input into AC output.

A trainer kit that uses a programmable logic controller to automate a scaled conveyor system used to teach industrial automation and sequencing logic.

A trainer kit that uses a programmable logic controller to simulate elevator control logic used to teach automation sequencing and interlocking.

A demonstration setup using a potentiometer to generate an error signal by comparing reference and feedback positions, used to teach error-detection principles in control systems.

An integrated laboratory setup comprising power semiconductor devices, converters, and measuring instruments used to teach power electronics conversion and control principles.

A power electronics trainer kit that demonstrates R, RC, UJT, and pulse-transformer triggering circuits used to fire thyristors in controlled rectifier and inverter applications.

Simulation software used to model, analyze, and visualize the kinematics and dynamics of robotic manipulators for robotics research and instruction.

A power electronics experiment setup that demonstrates single-phase midpoint cycloconverter operation for direct AC-to-AC frequency conversion under resistive and resistive-inductive loads.

A power electronics trainer kit that demonstrates buck (step-down) and boost (step-up) chopper circuit operation used to teach DC-DC conversion principles.

A demonstration setup using a pair of synchros to generate an error signal proportional to angular misalignment, used to teach error-detection principles in control systems.

A process control trainer kit that uses an SCR-based power control circuit to regulate heater temperature, used to teach closed-loop temperature control.

A trainer kit built around temperature sensors such as thermocouples or RTDs used to teach temperature measurement and signal conditioning principles.

A device used to read, write, and verify data on programmable memory chips and microcontrollers used in embedded systems development.